Whether it's the race bell or alarm bell, the Prime's modern design and ample ventilation motivate you to grab it and go on your next ride. - Technology: Composite Fusion - Features: Anti-Microbial Pads, Locking Sliders - Material: PC Shell & Under Wrap, EPS Foam - Vents: 21 - Weight: 270g / 9.5oz - Certification: EN 1078, CPSC, AS/NZS 2063-2008 - Intended Use: Commute, Recreational, Enthusiast - Small/Medium = 54 – 58cm - Large/X-Large = 58 – 62cm

Slay your inner demons as you log some serious miles. Featuring LDL multi-G impact technology and Composite Fusion, the Therapy is something everyone should experience. - Anti-bacterial pads - Locking Buckle and Sliders - Micro-fit closure system - Removable/Washable Liner Material: - PC Shell and Under Wrap - EPS Foam Certifications: - CPSC - EN 1078 Sizing: - Small/Medium = 55 – 61cm - Large/X-Large = 60 – 63cm

Proven Kali protection in a lightweight stylish full-face helmet. Whether you're knocking out laps in the bike park or gearing up your grom for their first shred session, the Zoka is tough to beat. - Removable/Washable Liner - Anti-Microbial Pads - Adjustable Moto-Style Visor Material: - ABS Shell - EPS Foam Certifications: - ASTM F1952 - CSPC - EN 1078 Sizing: - Medium = 50 – 51cm - Large = 52 – 54cm

Strap divider for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

- 15% lighter than classic Brentwood - 20% more ventilation than classic Brentwood (13 vents) - Zip Mold + construction - EZ-Fit retention system - Compatible with Bern Asteroid light - Removable flip visor - Average weight: 345g - MIPS: multi-directional Impact Protection System

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Replacement Pads for Lazer's BOB Helmet

Screws for Impala visor. - COMPATIBILITY: Impala MIPS, Impala - WEIGHT: 1g - MATERIAL: Aluminum

Freshen up the interior of your helmet with a new pad set! - Replacement pads for Jackal helmets

Freshen up the interior of your helmet with a new pad set! - Replacement pads for Sphere helmets - Attachment: Velcro - Material: Foam

Screws for Jackal Visor

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Camera mount for Jackal and Impala helmets. - COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala - ATTACHMENT: Velcro - WEIGHT: 13g - MATERIAL: Nylon

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad. - COMPATIBILITY: Cameleon MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Coyote MIPS, Coyote - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad COMPATIBILITY - Urbanize MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

- Replacement X-Static pads for Lazer's Wasp Air Helmet - X-Static pads are an anti-microbial, self-cleaning pad system

A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System. - COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS - BATTERY TYPE: LR41 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: ATS dial - WEIGHT: 15g - MATERIAL: Nylon

Visor for Coyote helmet COMPATIBILITY - Coyote MIPS - Coyote - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon

Visor for Impala helmet COMPATIBILITY - Impala MIPS - Impala - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS - ATTACHMENT: Blade or Blade+ helmet - WEIGHT: 45g - MATERIAL: Polycarbonate

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Z1 MIPS, Z1 - ATTACHMENT: Z1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate

The Asteroid fits all new and older Bern helmets with a two-hole mount located in the rear of the shell. USB rechargeable. - 12 Lumens - Micro USB rechargeable - 3 Light Modes (Flash 24 hours, Pulse 6.5 hours, Steady 5.5 hours) - Water Resistant - 16 grams - 26mm tall, 39mm wide, 20mm thick (w/o bracket)

Strap dividers for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - MATERIAL: Nylon

Magnetic mount lens for Lazer Bullet 2.0 helmet. The integrated lens is an integral part of the Bullet 2.0 helmet. It can be stored on the helmet surface using the magnetic docking when not in use. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: magnetic - WEIGHT: 24g - MATERIAL: Polycarbonate

The Chakra Child features Kali's Composite Fusion technology, in-mold construction, and extended rear coverage for added safety and protection. A visor molded directly into the shell and a dial closure system will give any child the confidence and motivation to get out and ride. - Washable, anti-microbial, moisture wicking pads - Polycarbonate shell with EPS foam - Integrated visor - 21 vents provide maximum airflow

From bike paths to the concrete jungle, the stylish and durable Boulevard is one of the best commuter helmets. It's versatile and designed for the pursuit of everyday fun for every ride. Turning your daily cycle through the urban labyrinth into something to look forward to, and your after-work pedal into a relaxing escape is what this helmet is made for. It fits your head and lifestyle with ease, allowing you to take in all the elements of the environments your cycling experiences take you through. Features: - LEM Tech Integrated EPS in-mold technology for impact energy management, durability, and lightweight feel - Reinforced visor for road and trail versatility - Thermo-formed and washable inner padding - 15 cooling vents to keep you comfortable and enjoying the ride - Easy-to-use snap on/off visor - Helmets Comply with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older in the US, and in Europe with EN 1078 CE Tech Specs: - Weight: 245 grams (w/o visor) - Visor: Reinforced Secure Socket Snap - Fit system: FS1 - Adult; Micro-Adjust - Padding: Brushed Nylon; Removable - Number of vents: 15 - Reflector: Yes, Decal - Webbing: Reflective

The Shadow Classic Helmet is constructed with a high-impact ABS hard shell with a light EPS core liner for even distribution of force upon impact. - ABS Hardshell construction with light EPS core liner - Includes two sets of padding for a custom fit - CE and CPSE certified - Shadow Crow Head rivets and Classic woven label - X-Small = 46 – 50cm - Small/Medium = 50 – 56cm - Large/X-Large = 56 – 61cm - XX-Large = 61 – 65cm