This tire is designed to shed mud and deliver traction on pavement and dirt. The Cultivator doubles as a solid tire for both the commuter and cyclocross rider.

The Newton MTR (Mountain Rear), part of our ultimate tire package developed for gravity riding & racing. A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections. Who Rides This Tire? Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain. Where Does This Tire Perform Best? Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails. Go Faster, Go Bigger The tire, that small contact patch that connects you to the ground, is arguably the most important part of your bike. When you’re in the start hut, about to drop into your race run you need to know that this essential component is designed specifically with the job in mind. What better choice than the tire named after the man who defined the very laws of gravity. For Downhill, Enduro, and trail Dominance Drive focused tread delivers speed and durability with tracking performance that inspires confidence transitioning from straight-line to cornering across a wide range of conditions. Construction A dual-ply, robust 60TPI construction, the 2x60TPI casing combines no-compromise durability, while retaining traction and support over the most rugged terrain. Grip3 Compound Rear specific, triple density 40/50/60a compound, offering balanced levels of grip and treadwear. Protection DH:Wall – A butyl layer located within the casing ply, providing our highest level of sidewall defence.

- Ramped center knobs - High shoulder blocks - Available in two Plus sizes

- Lighter and faster than the original - Control and predictability of the original but with less rolling resistance and weight - Front and Rear application

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Specifically designed for the vulcanization of tube patches, valve patches, and rubber-based tube valve repair units.

- Comfortable ride - Classic colors

- Hybrid tire with style

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

- Tight directional center tread pattern with lateral knobs for traction - Wire bead - Size: 26 x 1.95

Type: Patch Cement Size: Individual tube

Patch up punctures in your bike tires with Slime's peel and stick SKABS. No glue means no mess! These SKABS are quick and easy to apply, and come in a compact storage container. Just toss them into your bike bag. - Kit contains (6) pre-glued 1? patches and a scuffer.

- Forged alloy construction - Fits Schrader valves

- Anodized alloy construction - Fits standard Schrader valves

- Plastic storage box - Contains 7 large patches cement, and scuffer

• Includes a plastic storage box, 6 patches, cement, and scuffer

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

- Shim adds support to Presta stem used in a Schrader rim

Our standard butyl innertube with a 0.9mm wall thickness represents excellent value-for-money and strikes a nice balance between weight and durability. - P/V Presta valve (French valve) with 48/60/80mm length options for a wide range of rim depth compatibility - Easily identifiable from the RED color-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with a threaded valve and non-removable core - Packaged individually (carton/box)

Compatible with all tubeless road, MTB and gravel tires. Refill packs with 10 repair plugs (5x thin and 5x thick).

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Butyl rubber - Economy tube - Schrader valve - Wall thickness: 0.9mm

Vision's Presta Valve Extender simply screws onto your tire's built-in valve to make it long enough to protrude through your deep-section aero wheels (choose the right length to fit your rim depth). This ensures that you can keep your tires properly inflated. This lightweight and durable aluminum extender comes with a small tool (not shown) for an air-tight installation.

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

- Valve Type: Schrader - Valve Length: 32mm - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm